Complete Guide for Linksys WiFi router troubleshooting

Linksys router troubleshooting

A Complete Guide for Linksys WiFi router troubleshooting

 

Linksys WiFi routers provide fast and reliable network coverage allowing you to create a reliable browsing experience. Despite being one of the leading brands in the home computer network, you might encounter some issues. These may include errors related to internet settings or the hardware itself. In such instances, you will have to opt for Linksys router troubleshooting

 

How to troubleshoot Linksys WiFi routers?

Very often, Linksys router not working issues can be resolved simply by power cycling the device. You can follow the given steps for this procedure. 

  • Disconnect the power line from your Linksys router. 
  • Also, unplug the power cord from the modem. 
  • Wait for a minute and then insert the power cord in your modem. 
  • Subsequently, plug in the adapter into your Linksys router. 

This might solve the issue. If the issue isn’t resolved, you can follow alternative ways which have been listed below. 

 

METHOD 1: RECHECK YOUR INTERNET CONNECTIVITY

  • Check the internet LED on the modem. In case the LED indicator is green/ blue, there is no issue from the internet service provider. But, a red/ orange LED indicates the fault with the services of ISP. 
  • On detecting any issue with internet connectivity, you may contact your service provider for resolution. 

 

METHOD 2: ENSURE THE PRECISION OF CABLE CONNECTIONS

There might be instances when the Linksys router stops working due to incorrect cable connections. Users must make sure that the modem is attached to the WAN port whereas computers should be attached to the LAN port of the router. 

 

METHOD 3: RECHECK THE HEALTH OF THE CABLE/ CONNECTOR

In case your internet cable is damaged, make sure that you replace it. Similar is the case with the power adapter. Any damages to the cables might hamper your access to the internet. 

 

METHOD 4: UPDATING THE FIRMWARE OF THE ROUTER

Another way for Linksys wifi router troubleshooting is having an updated firmware. An outdated firmware will cause working issues with the router. Although these updates are made automatically, you may also check for updates manually. Follow the steps given below to update the firmware manually: 

  • Type 192.168.1.1 in your browser’s address bar. 
  • Fill the username and password details. The details for the login credentials are available either at the bottom or at the back of the router. 
  • Go to the advanced tab and select the firmware update. 
  • Upload the firmware file and click on ‘SAVE CHANGES’.
  • The firmware file can be downloaded from Linksys official website. 
  • The router will then itself install the updated software. 

 

METHOD 5: ASSESSING THE INTERNET SETTING

Inappropriate internet settings may also result in problems in using Linksys WiFi. Verify the internet setting from your ISP and configure accordingly. 

 

METHOD 6: DEALING WITH AN OVERHEATED ROUTER

If your router’s age is three to four years, you might have issues of overheating with your router. This will subsequently affect the wireless connectivity of the router. If your router is old, you can turn it off for approximately 10 minutes every day. This will assist in removing the saved cache files, ultimately maintaining the health of the router and complete Linksys router troubleshooting. 

If none of these comes to your rescue when facing Linksys routers problems, RESET the router by holding on the reset button until the red Dial light is on. Now you can proceed with restarting your computer.  

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top